Skimmers are an essential tool for keeping your pool clean and inviting. They help keep the sheets out of the water, so they will make sure that your robot pool cleaner or vacuum cleaner for the pool only cleans the bottom. But like any piece of pool equipment, skimmers have their downsides, too. In this article, find out about some of the downsides of skimmers, and then learn how beatbot products, including the pool robotic pool cleaner, can help to avoid them.
Contents
- 1 What is a Pool Skimmer?
- 2 Limited Coverage Area
- 3 Clogs and Maintenance Issues
- 4 Inefficiency with Fine Debris
- 5 Depending on proper levels of water.
- 6 Cleaning Skimmers Can be a Pain
- 7 Skimmers Can Skim Over Some Debris
- 8 How Does a Robot Pool Cleaner Overcome Limitations of Your Skimmer?
- 9 Final Thoughts: Is a Skimmer Enough for Your Pool?
What is a Pool Skimmer?
Before we get into the disadvantages, it’s essential to know what a pool skimmer does. A pool skimmer is a device that skims off debris from the water start. It relies on suction to draw in debris into the skimmer basket, where it’s filtered out. The skimmer is one of the main elements of pool maintenance, however, it can suffer from certain adversities that prevent it from doing its job properly.
Limited Coverage Area
The main drawback of the skimmers is that they again only sweep over the surface of the water. And while they work great at removing leaves and bugs and the like that float on top, they don’t fix dirt or algae, or debris that sinks to the bottom of the pool. This is the reason why only such cleaning systems, e.g. a robot pool cleaner or pool vacuum robot, are needed to properly clean the floor of your pool.
Solution: If a one-stop cleaning solution is what you seek, look no further than the Beatbot AquaSense Pro or Beatbot iSkim Ultra. Using autonomous suction technology, these robots clean both water surfaces as well as the pool floor. These machines are equipped with sophisticated sensors and algorithms that allow them to traverse the entire pool area for deeper and more thorough cleaning.
Clogs and Maintenance Issues
During periods of heavy debris accumulation, skimmers tend to clog easily. Leaves, dirt, and even bugs can clog up the skimmer basket, making it less effective and forcing the system to work harder. This often results in more time spent maintaining it and, sometimes, disruptions in your pool’s filtration system.
Solutions: Use robotic pool cleaners like Beatbot AquaSense to pick up grass, dirt, and leaves and wipe them clean to prevent clogs and reduce maintenance. These robots are autonomous, so they don’t require the same manual upkeep as skimmers, so you won’t have to constantly clean and maintain one.
Inefficiency with Fine Debris
Although skimmers are great trash collectors, they’re not as good at getting out the smaller stuff, like sand, silt, and tiny dirt. These tiny particles can linger in your swimming pool, which hurts water quality and makes the space discouraging to swim in.
Answer: You may require a pool or swimming pool robot cleaner for cleaning fine debris. For any type of pool, including Beatbot, many robotic pool cleaners contain highly efficient filtration systems, allowing even the finest particles to be captured and resulting in a cleaner pool.
Depending on proper levels of water.
The skimmers depend heavily on the level of the pool’s water. When the water level is too low, the skimmer won’t work correctly, and debris will be left floating in the pool. On the other hand, if the water level is too high, the skimmer will spill over and send dirt back into the pool. Therefore, skimmers are reliant on stable water levels to function correctly.
Solution: A robot pool cleaner is independent of the skimmer system, which means it won’t be affected by water level fluctuations. This also makes it a much more reliable choice for cleaning your pool despite any water fluctuations.
Cleaning Skimmers Can be a Pain
Who wants to clean a pool skimmer, especially in an inconvenient location? Over time, debris builds up in the basket, which can be hard to clean. A neglected skimmer can also cause algae or bacteria to grow, making the overall maintenance of your pool more of a chore.
Solution: Get a pool vacuum robot to lessen the burden of cleaning skimmers. These types of robots offer to clean your water surface and pool floor, spending practically no effort on your part and providing you with a crystal clear pool without manual labor.
Skimmers Can Skim Over Some Debris
In odd-shaped pools or areas that are difficult to reach, skimmers sometimes can’t get into every corner. This can create leftover debris in the pool, especially in tight spots, behind steps, or around ladders. This results in poor cleanliness of your pool.
Solution: For these spots, a robotic pool cleaner is perfect. Robots like the Beatbot AquaSense Pro come with sensors this specific robot is quite the expert at navigating complex pool layouts, ensuring no tight corners or tricky spaces are left untouched.
How Does a Robot Pool Cleaner Overcome Limitations of Your Skimmer?
Despite their efficiency and thoroughness as surface cleaners, skimmers are limited in some important ways: they do not clean anything but fine debris, they require proper water levels, and they require regular maintenance. Robot pool cleaners like those from Beatbot can help you overcome most disadvantages of using dependence only on skimmers.
Holistic Cleaning: A pool robotic pool cleaner offers comprehensive cleaning across the pool surface and floor. It also captures fine particles that skimmers may leave behind.
Self-Sufficient Operation: Robot pool cleaners do not need to be maintained regularly like skimmers. They do the cleaning by themselves — leave the dirty work to your vacuum cleaner for the pool so that you can get on with more important things.
Convenient Cleaning Performance and Better Efficiency: Robotic pool cleaners use sophisticated technology that provides effective cleaning performance and increased efficiency. A robot pool cleaner has the ability to reach areas that skimmers cannot, whether that is steps, corners, or deep end.
Final Thoughts: Is a Skimmer Enough for Your Pool?
Pool skimmers are great tools for keeping your swimming area clean, but they also have several disadvantages, including limited coverage, inefficiency with fine debris, and constant maintenance. One way to overcome these limitations and get your pool thoroughly cleaned is to use a robot pool cleaner or a vacuum cleaner for the pool. For floor and surface cleansing, these time-saving models, such as Beatbot AquaSense Pro are offered by brands such as Beatbot, making your pool a lot easier to own, cleaner, and efficient to use.
